Page 2 of 3
Re: Which brand thread to you prefer? and why?
Posted: Wed Apr 28, 2010 11:20 pm
by amy4t
I am using anchor and have used dmc, I don't see any diff with these two. However have seen my friends recent tatty teddy stitch and colour and thickness was very different with her threads I think they were venus. Im sticking with these two top ones I dont mind paying more for better quality and colour.
Looking for a nice trio for my living room something scenic or birds anyone got any suggestions? I don't want to pay too much so just the charts would be good?
Nice to meet you all!! Newbie Amz x
Re: Which brand thread to you prefer? and why?
Posted: Wed Apr 28, 2010 11:40 pm
by karen4bells
I almost always use DMC as they are the only threads available locally--and finding anchor threads even on ebay is never very easy. I've never had any trouble at all with them fraying and some of my threads are at least 5 yrs old--I have used some anchor threads, especially when I have bought a kit like tatty teddy, and very seldom really see any noticeable difference in the colors of the threads. I've stitched dozens of tatty teddies both from kits and from unkitted magazine charts and have not noticed any differences in the colors of them when finished.
Re: Which brand thread to you prefer? and why?
Posted: Thu Apr 29, 2010 2:39 am
by coffee_freak
I have always used DMC because that is what was most available to me when I started..and still to this day... I have never used any other brand..it's familiar to me and I have the complete set of colors so I just stuck with it..
back when I started stitching..over 15 years ago..the local craft store had them on sale for 10 cents a skein!!!!!! i bought every color and when the new ones come out, I buy those..but they are 36 cents now
Re: Which brand thread to you prefer? and why?
Posted: Thu Apr 29, 2010 9:25 am
by freelady
I have mostly DMC. I went for that as the first chart I did used it. Once in a while I find a skein that breaks a lot, but only once or twice. It hasn't really been a problem.
Re: Which brand thread to you prefer? and why?
Posted: Thu Apr 29, 2010 1:01 pm
by vanessanjf
I used DMC because most of my charts use DMC. Also they are easier to get hold of in the shops here.

Re: Which brand thread to you prefer? and why?
Posted: Thu Apr 29, 2010 4:53 pm
by XandraS
I mainly use DMC although I have some anchor ones as well and I haven't noticed any difference with them. When I started buying floss in Abu Dhabi I could only find DMCs but now my craft shop carries both. I'm trying to get a full set before we move back to the UK and they start getting expensive again

Re: Which brand thread to you prefer? and why?
Posted: Fri Apr 30, 2010 7:59 am
by violin
Up untill now, I have used DMC and never had any problems, but a friend of mine can get me Anchor for much cheaper when she goes away, so she brings me loads of Anchor back with her, she oes out about 3 times a year.
Re: Which brand thread to you prefer? and why?
Posted: Sat May 08, 2010 11:54 pm
by Fljotsdale
I always used Anchor and never had problems with it. I now mostly use DMC because it became easier to find, and then I got used to it. As good as each other. I have also used Coates, many years ago, but I don't remember how good it was.
I have recently started a Dimensions kit, and they use their own thread, which, imo, is nowhere near as good as either Anchor or DMC. Frays easily and I'm glad I just got some Thread Heaven!
Mind you... I'm stitching on Aida with this kit, and Aida is harder on thread than linen is.
Re: Which brand thread to you prefer? and why?
Posted: Sun May 09, 2010 9:07 am
by Dazbo666
My stash is probably 75% DMC, 20% Anchor, and 5% leftovers from kits etc.
I prefer DMC because I've found that they tend to have a slightly better sheen than a similarly coloured Anchor thread.
As for access to new threads, my local stash shop has the full range of DMC, and most of the range of Anchor available. Failing that, I often go to fleabay if I have a large order to fill.
Re: Which brand thread to you prefer? and why?
Posted: Sun May 09, 2010 8:57 pm
by BecomingMe
I've used mostly DMC because that is the most available...it seems that certain colours tend to fray a bit more (like pale yellow...this seems to be the worst)...I have found that I LOVE using some other types of threads...yet they tend to be a bit more expensive...I LOVE, LOVE HDF threads...I also like Gentle Sampler threads...and some Rainbow Gallery
Oh, one thing about fraying or fuzzing thread...beeswax or Thread Heaven works quite well when you use it prior to threading your needle...
Re: Which brand thread to you prefer? and why?
Posted: Tue Jun 01, 2010 5:59 pm
by Uulaq
Coming late to the party, but I use mostly DMC -it's just easier to find and most charts seem to be charted to DMC.
Except, I always use Anchor black and Anchor white - they just seem to be thicker and give better coverage than the DMC version. I don't know why, but it's been very consistent for me.
Re: Which brand thread to you prefer? and why?
Posted: Tue Jun 01, 2010 6:57 pm
by annkor26
I've always used DMC and the occasional specialty threads like metallics and silks. I just always assumed that DMC was the best! But now that we no longer have any cross stitch shops in North Texas, I'm stuck with the chains like Michaels and Hobby Lobby and they only carry DMC.
I've been seeing ads in Just Cross Stitch magazine for a brand from Spain called Finca. I'm wondering if it's as good as DMC.
Re: Which brand thread to you prefer? and why?
Posted: Tue Jun 01, 2010 7:29 pm
by socialsue
I use DMC because Anchor are hard to find here in Canada. I just discovered specialty threads but I don't always use them due to the cost...... DMC is around 49 cent each at Michael's and specialty threads can be over two dollars or more from my local LNS.
socialsue
Re: Which brand thread to you prefer? and why?
Posted: Thu Jun 03, 2010 5:15 pm
by shjordon
I use DMC, just because it's easier to find here. I have tried some "generic" threads that came 24 skeins to a bag because they were cheap. I won't make that mistake again!

Re: Which brand thread to you prefer? and why?
Posted: Fri Jun 04, 2010 9:04 am
by ~threadbear~
I mostly use DMC as it's so widely available and I was able to get bulk amounts cheaply.
I've only very rarely used Anchor, but have to say, I haven't seen any big difference.
The one thing I've found is that black seems to fray quicker than any other colour and have less coverage.

That's just a general observation though.

Re: Which brand thread to you prefer? and why?
Posted: Fri Jun 04, 2010 9:19 am
by kazzi29
dmc for me too

Re: Which brand thread to you prefer? and why?
Posted: Fri Jun 04, 2010 6:56 pm
by evelyn joan
..
Re: Which brand thread to you prefer? and why?
Posted: Fri Jun 04, 2010 7:12 pm
by StitchesCovenMags
It's DMC for me and indeed, most of my customers!!! I love all their threads and am sorry you are having a bad time with them.
I have all sorts of fav threads! ; Kreinick are FANTASTIC if you want a good metallic ; a bit pricey but worth it!
I love hand dyed threads for embroidery and the rayons from India are lovely to work with and gorgeous and shiney!
Re: Which brand thread to you prefer? and why?
Posted: Sun Jun 06, 2010 11:04 am
by stitchingmae
I am a fan of DMC. My aunt and mother used DMC.
There is a new brand out that compares itself to DMC and even has DMC comparison numbers on it its sullivan..but to me its appears dull and not as soft...maybe I am just a DMC snob..LOL
Re: Which brand thread to you prefer? and why?
Posted: Tue Jun 15, 2010 4:33 pm
by Fizzbw
I usually use DMC, but the kit I'm doing atm is Anchor and I'm finding that they fuzz up really easily, thank god I have some thread heaven as its very much needed imo.
Funny isn't it!
Anyone else notice that some colours (of any make) usually the darker ones like black and darker browns, seem thinner than other lighter colours?
Niki xxx