Page 1 of 1

Finishing a card

Posted: Thu Jan 13, 2011 5:14 am
by Oiralinde
I am making my wonderful mother-in-law a birthday and ai have a question. What do you use to attach the fabric to the paper? I searched and read double sided sticky tape, but I don't know if that would hold it well and couldn't it damage the threads/fabric? Just wondering what you do.

Re: Finishing a card

Posted: Thu Jan 13, 2011 6:36 am
by Rose
I usually use hot glue but you have to be a bit careful so the glue does not seep through and also you can burn your finger very easily!!!!!

Re: Finishing a card

Posted: Thu Jan 13, 2011 6:53 am
by RosemaryH
I use double sided, never had any problems at all with it.

Rosemary

Re: Finishing a card

Posted: Thu Jan 13, 2011 7:15 am
by ~threadbear~
Double sided sticky tape for me as well.
:)

Re: Finishing a card

Posted: Thu Jan 13, 2011 10:30 am
by Squirrel
I often use double sided tape or craft glue - not the hot one.

Either work well.

sally

Re: Finishing a card

Posted: Thu Jan 13, 2011 10:35 am
by Mabel Figworthy
Double-sided tape for me, and never had a problem with it.

Re: Finishing a card

Posted: Thu Jan 13, 2011 1:03 pm
by coffee_freak
i had made a tutorial a long time ago..i think i'll be making a new one soon..as I now use a better technique..double sided tape. It works much better than the glue technique I was using...

Re: Finishing a card

Posted: Thu Jan 13, 2011 1:06 pm
by Nachstenliebe
I usually use craft glue... but since you've all used double sided tape with great results I plan on trying it out for the next card I make
Faith

Re: Finishing a card

Posted: Thu Jan 13, 2011 1:32 pm
by Oiralinde
I think double sided tape is the winner! Thank you! My mother-in-law introduced me to cross stitching and I wanted to pay her back a little. I made her an ornament for Christmas and she loved it.

Re: Finishing a card

Posted: Thu Jan 13, 2011 9:31 pm
by suepollock
I use double sided tape but I use it at the top, bottom and sides only. This way there is no way of causing any damage to the stitching, especially if I have to adjust the placement.

Re: Finishing a card

Posted: Sun Jan 16, 2011 1:03 am
by Angel
Double sided sticky tabe holds incredibly well. It's what I use, and it's not that bad on the threads either. It seems to like to stay with the threads more than the card so when you pull the stitching off, it destroys the card before the stitching. I tend to put it around the design though rather that over the stitching.