Page 1 of 3
Ready for a frame & stand set-up
Posted: Sun Jan 12, 2014 8:54 pm
by backafteradozenyrs
DH never did make me that promised floor stand
Now that we've moved in to the new house & I
really want to get back in the swing of things with my stitching but I've found that holding a hoop/Q-snap can be tiring (I'll still do that when I take a project to go) at home I want a stitchy corner. In our old house there was no room for dedicated stitching area but here we have the area DD & I have staked out for crafting.
DH agreed I can buy a stand (once I have that area cleared). So I have a little bit of time to make up my mind.
I've heard y'all talking different stands & all. When I did a search for floor stand here on the forums, MANY results showed up. Thought I'd start a new thread & ask all y'all to put links in to the place where you've found this stand or that frame/stand.
edited to add: & Please put your thoughts down on whatever stand you post/others post that you have experience with. tia
Re: Ready for a frame & stand set-up
Posted: Sun Jan 12, 2014 8:55 pm
by backafteradozenyrs
I'll start with this one I've just found:
Edmunds "Stitchers Wonder":
http://faedmunds.shptron.com/p/stitchers-wonder" target="_blank
Do any of y'all have this? How's it working for ya'? Would you recommend it to an intermediate stitcher?
Thanks in advance!
Re: Ready for a frame & stand set-up
Posted: Sun Jan 12, 2014 9:03 pm
by pattiebelle
I'm glad you asked! I love sharing info on my MARK II floorstand.
http://hearthsidecraftworks.com/" target="_blank" target="_blank
I like that it's made of wood, so it looks like a nice piece of furniture. I like that it has a Qsnap adapter, as well as scroll rods.
It's a bit pricey, but I've used it everyday for the past year and a half, so amortize that over the rest of my lifetime of usage, and it's just pennies for the lifetime of ease and comfort.
You'll find what's right for you. I had to take into consideration the stitchy chair I use, because the stands that angle in from the side would not work with it.
I'm happy you get to shop for this. It's really alot of fun!!!
Re: Ready for a frame & stand set-up
Posted: Sun Jan 12, 2014 9:11 pm
by backafteradozenyrs
Chair? That's right, I need a stitching chair......I do have an idea percolating......
edited to add: Thank you for posting about the Millennium...that was 1 I bookmarked 2 odd years ago. I'm not sure what I'm going to allow myself to spend (it's been awhile since I've spent $$ & DH has gotten a lot of overtime...so I guess my conscious is the limit!)
Re: Ready for a frame & stand set-up
Posted: Sun Jan 12, 2014 9:19 pm
by mauveme
backafteradozenyrs wrote:I'll start with this one I've just found:
Edmunds "Stitchers Wonder":
http://faedmunds.shptron.com/p/stitchers-wonder" target="_blank" target="_blank
Do any of y'all have this? How's it working for ya'? Would you recommend it to an intermediate stitcher?
Thanks in advance!
With that one you won't be able to turn your stitching around to get at the back, the scroll rods prevent you from flipping it, I had one like that and it was annoying.
Re: Ready for a frame & stand set-up
Posted: Sun Jan 12, 2014 9:53 pm
by Reta
Re: Ready for a frame & stand set-up
Posted: Mon Jan 13, 2014 12:25 am
by fccs
That's the one I got last month. I love it, especially for large scroll frames. Because your working frame rests on the arms, it can hold any size and type. To get to the back of your piece you just flip the working frame, same as if you were holding it.
I also have this one, which is good for all but the larger and therefore heavier scroll frames. The clamp that holds the working frame is wide and holds securely, but it can be a pain to get to the back of the project to start or end a thread.
http://www.amazon.com/Edmunds-6111-Univ ... B000YZ7M0W" target="_blank" target="_blank" target="_blank
Re: Ready for a frame & stand set-up
Posted: Mon Jan 13, 2014 6:56 pm
by Allyn
I've used Tomorrow's Treasures stands from American Dream Products for over two decades.
http://www.adp-usa.com" target="_blank
When I stitch, I sit in a recliner with my feet kicked up, so I can't use a floor stand that stands in front of me. The side-reach stands, like the Lowery, either don't reach far enough to get the stitching over in front of me or the clamp can't grip the scroll frame tight enough to keep it from falling. (I'm usually using 30-inch or 36-inch heavy-duty scroll rods.) The legs on the Mark 2 floor stand don't have a brace bar across the bottom of the legs and they looked like they might splay out with the amount of weight I'd put on them. They probably wouldn't, but they just don't look sturdy/stable enough for me.
I like the Tomorrow's Treasure stands because they're made of oak and they look like a piece of furniture so I don't mind having them in the living room even when I'm not stitching. (I say 'they' because I have a floor stand and a lap stand.) On my current WIP, I'm using the lap stand to straddle the chair.
I have two wooden tray tables -- one on each side of my chair. Each end of the lap stand sits on a tray table. With the frame straddling the chair, I can move it left or right so whatever area of the stitching I'm working on can be centered in front of me. If I'd discovered beforehand how well this set-up works for me, I wouldn't have bothered buying a floor stand.
My advice: decide on your chair first. What you sit in and how you plan to position your body to stitch comfortably will have a big impact on what style of stand will work best for you.
Re: Ready for a frame & stand set-up
Posted: Mon Jan 13, 2014 8:08 pm
by littleturtlegirl
Allyn wrote:I've used Tomorrow's Treasures standsf rom American Dream Products for over two decades.
http://www.adp-usa.com" target="_blank" target="_blank" target="_blank
When I stitch, I sit in a recliner with my feet kicked up, so I can't use a floor stand that stands in front of me. The side-reach stands, like the Lowery, either don't reach far enough to get the stitching over in front of me or the clamp can't grip the scroll frame tight enough to keep it from falling. (I'm usually using 30-inch or 36-inch heavy-duty scroll rods.) The legs on the Mark 2 floor stand don't have a brace bar across the bottom of the legs and they looked like they might splay out with the amount of weight I'd put on them. They probably wouldn't, but they just don't look sturdy/stable enough for me.
I like the Tomorrow's Treasure stands because they're made of oak and they look like a piece of furniture so I don't mind having them in the living room even when I'm not stitching. (I say 'they' because I have a floor stand and a lap stand.) On my current WIP, I'm using the lap stand to straddle the chair.
I have two wooden tray tables -- one on each side of my chair. Each end of the lap stand sits on a tray table. With the frame straddling the chair, I can move it left or right so whatever area of the stitching I'm working on can be centered in front of me. If I'd discovered how well this set-up works for me beforehand, I wouldn't have bothered buying a floor stand.
My advice: decide on your chair first. What you sit in and how you plan to position your body to stitch comfortably will have a big impact on what style of stand will work best for you.
I too have the Tomorrow's Treasure stand. I received it as a Christmas present this year and I am in LOVE! At first I had issues because I had never used a scroll before, but after the help of wonderful people on the forum I am in LOVE with this stand. I think for me it is the best stand as a starter stand and will most likely be my staple stand for years. It is made soooo well. Plus I got mine at AC Moore with a coupon so it was a very cheap stand for my first one. Most of the stands are very expensive and my fear is that it will not meet my needs.
The Tomorrow's Treasure stand is great!!! I find it very versatile. I can stitch on my lap, put it on the table in the kitchen and stitch or I have put it on two tv trays and stitch away. I find the options endless. I think with other frames you might be limited. PLUS, I can move it up and down depending on where I am working on the piece to save my shoulders.
Another complaint that people have with frames is that you can not get to your back. With this frame you just flip it over and your at your back. Ok clearly I love this frame.
Re: Ready for a frame & stand set-up
Posted: Tue Jan 14, 2014 5:51 am
by stitchingmae
it says that it only hold 12 inch deep frames how wide of a frame will it hold would it hold a 20 inch millenium?
I have an ERGO, but reccently I cross threaded the v clamp, and the clamp is stuck to the frame. I contacted the seller He can be hard to get in touch with, to see what I can do to get another one, my dad seems to think he can tap the screw out, or if needed break the clamp off and fashion me a new one.. we shall see fingers crossed.
Re: Ready for a frame & stand set-up
Posted: Tue Jan 14, 2014 8:11 am
by Reta
I have a 12 x 24 roller frame on mine at the moment no problem
But hubby made the easel part to fix in the clamp
So if you already have a stand i bet your dad could make you and easel to fit your needs
Found this
http://www.youtube.com/watch?v=kGDE00D-jks" target="_blank
Re: Ready for a frame & stand set-up
Posted: Tue Jan 14, 2014 10:57 am
by curly sue
I had this one for several years when I was not stitching. I only tried it once, and it would have been great for the stitching I do. It was a gift (gently used), so I eventually passed it on. Wish I had it back.
http://mediacdn.shopatron.com/media/mfg ... 1219169193" target="_blank" target="_blank
Re: Ready for a frame & stand set-up
Posted: Tue Jan 14, 2014 4:54 pm
by fccs
maemae0410 wrote:
it says that it only hold 12 inch deep frames how wide of a frame will it hold would it hold a 20 inch millenium?
The 12" it mentions is refers to the height of the frame, and the main reason for that limitation is there is a little clamp for accessories right in the middle. If there are accessories attached (light,magnifier, etc.), they will get in the way of the frame. Right now I'm using it with a scroll frame that is about 27" wide (10" high) with no problem.
I'm really very, very happy with this stand. It was worth the money.
Still hoping your dad can fix your Ergo so you can save some money on a new stand (and use it for new stash
).
Re: Ready for a frame & stand set-up
Posted: Tue Jan 14, 2014 10:32 pm
by Chellie
@backafteradozenyrs I am glad you posted this. After picking up my needles again after being away from the craft for so long, I too just set up my stitchy spot and was on the market for a floor stand.
I still owned my scroll frame by American Dream Products,
http://www.adp-usa.com/product.aspx?pagename=Product" target="_blank Details&itemid=618&prodid=1465.
*Although the next item on my WishList is the Millennium Frame*
The floor stand I fell in love with was The Stow-away Portable Floor Stand Elite Series by K's Creations,
http://www.kscreations.com/floor_stowaway.htm" target="_blank, I got a great deal on this frame from a seller on
http://www.UsedVictoria.com" target="_blank, something like Craigslist for the US, but it's Canadian. I paid $160 for the frame & shipping. With doing my internet shopping, I found the frame ranged in price from $198-$330 before shipping.
I am also looking for a lap frame, I will probably go with a K's Creations lap frame because of the universal clamps.
The floor frame is scheduled to arrive this Friday, I will update you on how it works for me.
Re: Ready for a frame & stand set-up
Posted: Wed Jan 15, 2014 6:26 am
by Oriettait
I have this one too and I have used it for almost a year. I found it to be very practical as I can easily flip the frame to reach the back of my project. I would have trouble working with a stand that "trap" my frame. It is also made of wood and does not look bad in my living room.
As Debbie said the limitation is only in the height of the frame you can rest on it, not on the width. I use qsnap any size combination of 11" 14" and 17" but even a large scroll frame would rest on it no problem. The only thing I would doubts is to use it with millenium frames extendively.. It is a lightweighted stand and those frame looks kind of heavy. It would work but maybe it would be a little tipsy.
It is ment to stand in front of you so it does not work with a recliner or in bed.
Re: Ready for a frame & stand set-up
Posted: Wed Jan 15, 2014 2:49 pm
by wwdiva
maemae0410 wrote:
it says that it only hold 12 inch deep frames how wide of a frame will it hold would it hold a 20 inch millenium?
I have an ERGO, but reccently I cross threaded the v clamp, and the clamp is stuck to the frame. I contacted the seller He can be hard to get in touch with, to see what I can do to get another one, my dad seems to think he can tap the screw out, or if needed break the clamp off and fashion me a new one.. we shall see fingers crossed.
Quick question Reta...
I am setting aside money to save for an Ergo as I sit in a recliner. Would you recommend it in view of this issue?
I am unable to work on my larger projects with my American Dreams lap stand and the floor stand I have doesn't work with recliner. These are real expensive so I want to make sure it's a good choice!
Thanks for input.
Cheers
Re: Ready for a frame & stand set-up
Posted: Wed Jan 15, 2014 6:17 pm
by Allyn
wwdiva wrote: ...I am setting aside money to save for an Ergo as I sit in a recliner. ...I am unable to work on my larger projects with my American Dreams lap stand and the floor stand I have doesn't work with recliner.
I certainly don't want to dissuade someone from getting a new stand, but I'm curious. I use the American Dreams lap stand while sitting in a recliner. What is your set-up that it isn't working for you?
Re: Ready for a frame & stand set-up
Posted: Wed Jan 15, 2014 8:01 pm
by wwdiva
Allyn wrote:wwdiva wrote: ...I am setting aside money to save for an Ergo as I sit in a recliner. ...I am unable to work on my larger projects with my American Dreams lap stand and the floor stand I have doesn't work with recliner.
I certainly don't want to dissuade someone from getting a new stand, but I'm curious. I use the American Dreams lap stand while sitting in a recliner. What is your set-up that it isn't working for you?
Two of my projects rods are wider than the width of the seat of my recliner so my lap stand doesn't work for these projects. Now that the stitching is moving over to the left side of the project, I no longer can hold them in my arm and reach that far to that side of the scroll frame. So in my basket they sit.
Diva
Re: Ready for a frame & stand set-up
Posted: Thu Jan 16, 2014 6:14 am
by Allyn
wwdiva wrote:
Two of my projects rods are wider than the width of the seat of my recliner so my lap stand doesn't work for these projects. Now that the stitching is moving over to the left side of the project, I no longer can hold them in my arm and reach that far to that side of the scroll frame. So in my basket they sit.
Diva
I use either 30-inch or 36-inch scroll rods for just about all my projects. I set the legs of the lap stand on two TV tray tables -- one on each side of my chair -- so the scroll frame straddles the seat. Would that work for your projects?
Re: Ready for a frame & stand set-up
Posted: Thu Jan 16, 2014 2:55 pm
by Tamnsin
wwdiva wrote:maemae0410 wrote:
it says that it only hold 12 inch deep frames how wide of a frame will it hold would it hold a 20 inch millenium?
I have an ERGO, but reccently I cross threaded the v clamp, and the clamp is stuck to the frame. I contacted the seller He can be hard to get in touch with, to see what I can do to get another one, my dad seems to think he can tap the screw out, or if needed break the clamp off and fashion me a new one.. we shall see fingers crossed.
Quick question Reta...
I am setting aside money to save for an Ergo as I sit in a recliner. Would you recommend it in view of this issue?
I am unable to work on my larger projects with my American Dreams lap stand and the floor stand I have doesn't work with recliner. These are real expensive so I want to make sure it's a good choice!
Thanks for input.
Cheers
Artisan Products are beautiful, hand made products. I have a Elan lap stand that has seen lots of use and is much loved. That said when I decided to buy a floor stand I did not choose to buy the Ergo I originally wanted.
In February of last year I sent my first email asking to purchase an accessory for my bookchart and to request the price for the Ergo floorstand and accessories in walnut (the website instructs to ask for pricing by email). None of these items are on the product list so that you can order them directly from the website. After two weeks with no response I left the first voicemail.
Perhaps because I was asking for pricing on items they might have felt I was window shopping without real intent to order.
By August I didn't care anymore about the frame matching my furniture and I ordered my Lowery. Four days later I was stitching away happily. I have nothing but good things to say about the Lowery and I believe it was a better choice for my needs.
I feel like a jerk saying these things in a forum but if someone has their heart set on an Artisan Design stand (or parts for one) be prepared to work for it.
