This is not really a WIP, but an experiment. As you may know DH took me to the needlework exhibition at Witney Antiques. It was gorgeous! and so interesting to be able to study these embroideries close up and see the stitching.
Unfortunately, although the catalogue/labels mentioned the materials and threads/beads/etc used, it didn't always say what technique was used. Even more unfortunately, where they did it was usually not too difficult to tell anyway (florentine work, couched metallics, beadwork, eyelets), but where I REALLY wanted to know, they kept silent!
One of the techniques I was curious about was the one used, among others, on
this jacket panel and also on a smoking cap. It looked very much like a double silk thread couched. Here is a very small detail from the catalogue (Rose, do say if that's a copyright infringement and I'll take it down, but I hope as it's this small it won't be):
In some places you can see that there are two colours running underneath the same couching, which is how I could tell a double thread was used. The couching appears to be "bricked" inmost places, i.e. every next line of couching the little stitches are in a different place from the previous line.
There was only one problem -- I couldn't see the back of the jacket panel, but it was possible to look at the inside of the smoking cap, and all it showed was an outline of stitches. This suggested that it was almost like darning/weaving on top of the fabric -- lines of thread stretched (like satin stitch, only not going all the way round the back but taking the first stitch left to right, then next right to left and so on), then woven through.
So I thought I'd try both and see what looked most like the picture. On 36ct evenweave and using Japanese flat silk (thickness 10 sugas, if anyone is interested

)I stitched a leaf free-hand using the darning method, and soon found that a) it is
very difficult to make the shape you had in mind, b) the weaving gets terribly fiddly when you get to the final bits and c) it looks like a badly darned sock, albeit in silk. That last effect may of course be because of my lack of skill and experience with this particular technique

.
I then stitched another leaf using the couched satin stitch method, and this was much easier to shape, much easier to work, and looked neater (I edged both leaves with Holbein stitch in a darker green). I liked it so much that I drew a tulip outline on the fabric and filled in the three petal, changing colour half-way through by couching one thread of each colour. I would like to have edged it in a darker pink but I only have two shades; I may edge it in the same colour. Here is a picture -- I had to use flash cause it's such a dark morning, but it'll give you an idea:
On non-count material you'd draw the outline and simply fill it, on counted material you can either draw an outline (as I did here) or make a chart. Either way, what I did was do two satin stitches on top of each other, then couch using the same thread by coming up a hole right above the threads, and taking it down the hole that the thread is covering. Skip one, then do the same. On the next line, use the holes that weren't used last time. Sorry that sounds a bit muddly but I hope the picture shows it clearly.
I love the texture and shine of this! Will be using it for other projects, I think, it is really relaxing to do. I may try it with other silks, and possibly perles and stranded cottons to see how the effect differs.